A.I.M. now offers the most widely used brand of circulator in the United States. They are available in cast iron for closed loop heating or bronze for domestic water and open loop heating applications. In most cases Taco Circulators can be serviced by simply changing an inexpensive cartridge rather than changing the whole unit.

Taco Circulator Flange Sets bolt to the circulator and have female threads to accept a male adapter. Four sets of nuts and bolts are included.

To minimize the risk of the heating system becoming air bound, use a Taco Vortech Air Eliminator. The Vortech is designed to eliminate any air, which remains after purging. Air in a heating system is extremely destructive. It can cause premature failure of almost every component of the system including the boiler. The Vortech removes air from a system much faster than a typical air-scoop.

For larger diameter pipe the Taco Flo-check Female NPT is used in place of the Taco Flo-check Sweat. This Flo-check has the capability of being installed horizontally or vertical to horizontal as the arrows indicate. The Flo-check Female NPT also has a manual-opening knob to override the flow check capability.

This incredibly accurate Tempering Valve is used to mix the supply and return water together to temper it for a radiant floor system. For domestic water the Tempering Valve can be used to prevent fluctuation in hot water temperatures and as an anti scald valve.

The Isolation Flange with Flo-Check is a isolation valve combined with a spring check valve that attaches to the circulator. It helps to prevent the improper flow of fluids, as well as assiting in easy serivce or replacement without haveing to drain the entire system.

These Compression Fittings are used to connect PEX Pipe to the Deluxe Manifold, make repairs or connect to metal pipe.

These Compression Fittings are used to connect PEX-AL-PEX Pipe to the Deluxe Manifold, make repairs or connect to metal pipe. They have a double O-ring barbed insert with an isolation ring to prevent contact between the brass fitting and aluminum core of the pipe.

The 3-Way Mixing Valve is a proportional mixing device. It allows manual incremental adjustment of the quantity of supply and return water that is being mixed. For specific output temperature control of the 3-Way Mixing Valve an Outdoor Reset Actuator is required.

This manifold can be used in any radiant heating installation. The manifold(s) are purchased based on the various zones that are required. The manifold is made of the highest quality stainless with balancing system incorporated into the system. All the various manifolds come complete with mounting bracket(s), supply and return sections, and necessary plugs & adapters.